Ghost prompts unist specified don't exist what to do when reinstalling xp system

Editor to share with you Ghost reinstall xp system tips unist specified don't exist how to do, I believe that most people do not understand, so share this article for your reference, I hope you will learn a lot after reading this article, let's go to know it!

Cause analysis:

In fact, the main idea is: a specific partition (unit) does not exist, shsucdx can not be installed, the main reason for this problem is that there is no achi driver loaded under dos, the partition can not be recognized.

Solution:

Ghost reinstalls the system XP when prompts "unist specified don't---" the countermeasure is to change the hard disk mode ACHI to IDE.

The specific steps are as follows:

1. Press F2 to enter BIOS when booting, press enter key to select IDE here in Configuration-SATA Mode Selection, and press F10 to save.

2, or start up and hold down the f2 key to enter the BIOS setting, there is an option for sata controller mode under the configuration option, select compatible for ide mode, select ahci for sata mode, select compatible mode here, and then press f10 and then press enter key to exit.

The above is all the contents of the article "what to do when Ghost reinstalls unist specified don't exist when reinstalling xp system". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!