Install the citrix xenserver 7.1.0 system

1. Enter the installation interface, as shown in the following figure:

2. Select-Keyboard mode Select default-American, ok, as shown in the following figure:

3. Remind you to clear the disk information when you install the system, make a backup, and click ok, as shown in the following figure:

4. Select Accept EULA here, as shown in the following figure:

5. Select to install on the local hard disk, select the first item, and click ok, as shown in the following figure:

6. Select the local CD-ROM local media for the installation media. For the first item, click ok, as shown below:

7. Select Skip verification here to skip the detection of installation media, and click OK, as shown below:

8. Set the password and enter the login password of XenServer, which is the root password, as shown in the following figure:

9. Select the network card (because I have 4 network cards, I choose eth0), and click OK, as shown below:

10. Define the IP address of the management network. I choose to configure the IP address manually, enter IP, mask and gateway, and click ok, as shown below:

11. Enter a custom Hostname (computer name) and enter the DNS Server1 address, as shown in the following figure:

12. Select Asia (Asia) by region, as shown in the following figure:

13. Select Shanghai for time zone, as shown in the following figure:

14. Set the time method, select Manual timeenty (manually enter time), and click OK, as shown in the following figure:

15. After all the settings are completed, start the installation, select Install XenServer, and hit enter, as shown in the following figure:

16. The interface for starting the installation of XenServer, as shown below:

17. Select NO and do not install help documentation, as shown in the following figure:

18. When the installation is almost complete, the following window appears, enter the current correct date and time, and click OK, as shown in the following figure:

19. The following interface has been installed. Click OK and restart automatically, as shown below:

20. Restarting, as shown below:

21. The XenServer 7.1 system has been installed successfully, as shown in the following figure:

The installation is complete. I hope I can help you.