Network installation of Fuji Xerox DocuCentre-III 2007 Printer

Newly installed Window2012Server, ready to install the printer as a print server, as a result, how to install can not print, it seems that there is a problem, many times, the original is that I chose the wrong port, must be TCP/IP port.

Enter the IP address of the printer here. If you don't know the IP address, you should check it through the DHCP service.

Prompt can not find the device, several times did not choose to install this is because the prompt can not be found here, so choose other ports, the last installation is 5 years ago, there is no record, so forget, this time must be written down, the network installation can only choose TCP/IP, local ports can not be selected, otherwise even if installed, it is impossible to print ah.

The type of device can be selected by the relevant model or customized.

To achieve this step, come to think of it, there is a door, the same as before, should be OK.

Download the corresponding driver from the official website, decompress it, find the * .inf file, and install it.

Test it after installation, although the prompt is not available, it can be printed.

After sharing, set permissions, access the printer server locally, find the shared printer, double-click and follow the prompts to install the printer driver, you can print, but some components are not available, such as this double-sided printing, it should have been possible, but not this time.

Find this tab, choose nothing to have, as long as it can be changed, can not be changed is really not.

Now you can print on both sides, OK.