Instructions for the use of DFL automatic virtual loading

Under what circumstances do you use the function of virtual loading?

When we deal with the hard disk when we do the data recovery, we encounter the case that the G meter is bad, there are many bad channels, and we need to use the power-off soft and hard reset.

When the power is cut off after processing, and the things in the virtual cache are lost, then the virtual load needs to be reloaded.

If you deal with it manually, in the case of many bad channels, it is easy to get stuck and cannot be copied.

Then we use automatic virtual operation, set up the way of virtual loading, and let the device automatically reset and load. Keep the whole copy smooth.

A Hitachi disk is connected to the DFL data recovery device, and after separate processing in the device, automatic virtual is used, and the device automatically identifies the disk condition.

Check whether or not to perform virtual loading. When we choose the model and method, the program will be carried out automatically.

In the case of many bad channels, it is recommended to check soft reset or hard reset in the basic settings.

Loading mode: this option reads the original disk P table when loading from the hard disk.

External loading: this option is to call the P-table module that has been backed up in advance (it is recommended that you do not have to read the P-table every time)