SLTechnology News&Howtos › Servers ›

VLAN and Trunk configuration of Huawei switch

Shulou Source: shulou.com Published: 2022-06-02 16:03:36 10月04日 Update

Create the following network topology through eNSP

1. Configure the first switch sw1

Undo ter moniter / / turn off information interference

System-view / / enter the system view

[Huawei] sysname sw1 / / modify the switch name to sw1

[sw1] vlan batch 5 10 / / create vlan5 and vlan10

[sw1] interface Ethernet 0ram 0Compact 1 / / entry port 1

[sw1-Ethernet0/0/1] port link-type access / / configure access mode for port 1

[sw1-Ethernet0/0/1] port default vlan5 / / add port 1 to vlan5

[sw1-Ethernet0/0/1] interface ethernet 0Compact 0 / / entry port 2

[sw1-Ethernet0/0/2] port link-type access / / configure access mode for port 2

[sw1-Ethernet0/0/2] port default vlan10 / / add port 2 to vlan10

[sw1-Ethernet0/0/2] interface ethernet 0Uniple 22 / / enter sw1 port 22

[sw1-Ethernet0/0/22] port link-type trunk / / configure trunk mode for sw1 port 22

[sw1-Ethernet0/0/22] port trunk allow-pass vlan5 10 / / add vlan5 and vlan10 to trunk link trunk

2. Set up the second switch sw2

Undo ter moniter / / turn off information interference

System-view / / enter the system view

[Huawei] sysname sw2 / / modify the switch name to sw2

[sw2] vlan batch 5 10 / / create vlan5 and vlan10

[sw2] interface Ethernet 0ram 0ram 3 / / entry port 3

[sw2-Ethernet0/0/3] port link-type access / / configure access mode for port 3

[sw2-Ethernet0/0/3] port default vlan5 / / add port 3 to vlan5

[sw2-Ethernet0/0/3] interface ethernet 0ram 0ram 4 / / entry port 4

[sw2-Ethernet0/0/4] port link-type access / / configure access mode for port 4

[sw2-Ethernet0/0/4] port default vlan10 / / add port 4 to vlan10

[sw2-Ethernet0/0/4] interface ethernet 0Uniple 22 / / enter sw2 port 22

[sw2-Ethernet0/0/22] port link-type trunk / / configure trunk mode for sw2 port 22

[sw2-Ethernet0/0/22] port trunk allow-pass vlan5 10 / / add vlan5 and vlan10 to trunk link trunk

3. Test China Unicom