Router wan light is not on (router wan light is not on)

Audio commentary

Hello, everyone. The meeting will answer your questions. Router wan light is not on, router wan light is not on, many people do not know this, now let's take a look at it!

Answer:

1. Check whether the network cable interface connected to the corresponding interface is loose, and replace the network cable connected to the corresponding interface for testing.

2. Replace other interfaces, test whether it is normal, connect the interface with other devices, and check whether it is normal.

3. Connect the local area network port directly to the wide area network port with a network cable, and test whether the light is normal.

4. Check whether the household electricity bill is in arrears.

5. Router

6. A router is a hardware device that connects two or more networks and acts as a gateway between networks. It is a special intelligent network device that reads the address in each packet and then decides how to transmit it. It can understand different protocols, such as the Ethernet protocol used by the LAN and the TCP/IP protocol used by the Internet. In this way, the router can analyze the destination addresses of packets from different types of networks, translate the addresses of non-TCP/IP networks into TCP/IP addresses, and vice versa, and then, according to the routing algorithm selected, send each packet to a specified location according to the best route. Routers can connect non-TCP/IP networks to the Internet.

This is the end of this article. I hope it will be helpful to all of you.