OSPF multi-distribution simple configuration is suitable for novice rookies (can follow)

Experimental topology diagram

Experimental tool

GNS3

Step 1 of the experiment. Build the corresponding virtual device 2 according to the topology diagram. Enter R1, configure interface IP, configure default route

3. Enter R2, configure interface IP, configure static route

4. Enable OSPF protocol, set router ID, inject directly connected network segments and static routes

5. Enter R3, configure interface IP, configure default route

6. Enable OSPF protocol, set router ID, and inject default route

7. Enter R4, configure interface IP, enable OSPF and RIP protocols, and inject RIP into OSPF and OSPF into RIP

8. Enter R5, configure interface IP, and enable RIP protocol

9. Enter R6, configure interface IP, configure static route

10. Set IP to PC1-4 respectively

11. Verify the interconnection of the whole network

twelve。 The interworking of the whole network is realized.