Deploy Lync Server 2010 Edge Server
The edge computer is named Lynced
IP address configuration: internal IP:192.168.5.204
Mask: 255.255.255.0
Gateway: empty
DNS: 192.168.5.200
External IP:192.168.6.2
Mask: 255.255.255.0
Gateway: 192.168.6.1
1. Add DNS to Lync Edge Server and add A record of LYNCED.domcool.com to DC
two。 Export and copy the configuration of the front-end server to the Lync Edge Server
Export-Csconfiguration-FileName c:\ configuration.zip
(note: if you first create a new edge pool on the front-end topology generator, do not select NAT conversion if you publish edges with TMG)
3. Install deployment wizard on edge select install or update LYNC SERVER system
4. Install local storage, select browse edge configuration when installing local configuration storage
5. Then perform step 2 to install and remove LYNC components, step 3, request to install or assign a certificate
、
6. Apply for two certificates and download and assign them respectively through http://dc.domcool.com/certsrv
、
7. Import the certificate requested and the downloaded root certificate into the console root node-computer certificate
8. Certificate allocation (assign two corresponding certificates according to the requested certificate)
9. Start the service
10. Enable external access
Release SIPS 44442port on 11.TMG
twelve。 External installation of the test server WIN-302SHVDP9E0 (simulating external clients, as well as DNS parsing) requires the installation of the root certificate chain
Network card sequence
Export-Csconfiguration-FileName c:\ configuration.zip
Import Edge configuration import-csconfiguration-localstore-filename c:\ configuration1.zip
Verify Edge replication status Get-CsManagementStoreReplicationStatus
Forced replication of top Invoke-CSManagementStoreReplication
