How to create an OVS flat network
In this issue, Xiaobian will bring you about how to create an OVS flat network. The article is rich in content and analyzes and narrates it from a professional perspective. After reading this article, I hope you can gain something.
Create OVS flat network today.
Admin -> Networks, click the "Create Network" button.
The Create page is displayed.
Provider Network Type Select "Flat."
Fill in "default" for Physical Network, which is consistent with the flat_networks parameter value in ml2_conf.ini.
Click "Create Network" and flat_net is successfully created.
Click the flat_net link to enter the network configuration page. There is no subnet yet. Click the "Create Subnet" button.
Set the IP address to "172.16.1.0/24."
Click "Next" and check "Enable DHCP."
Click "Create" and the subnet is created successfully.
What happened to the underlying network?
View the network structure of the control node and execute ovs-vsctl show
Neutron automatically creates the flat-net dhcp interface "tap83421c44-93" on the br-int bridge.
The above is how to create an OVS flat network shared by Xiaobian. If there is a similar doubt, please refer to the above analysis for understanding. If you want to know more about it, please pay attention to the industry information channel.
