Simple use of H3C Simulator

1. Enter the system view, as shown in the figure. The device starts in the user view by default, enter the command system-view to enter the system view, and the prompt status changes to [RT1]. Enter the quit command to return from the system view to the user view, and the prompt status changes from [RT1].

two。 Use help wildcards, as shown in the figure. Enter the starting character of the command with a question mark, and all commands that begin with the starting character are listed. After entering the command with a question mark, the system lists the parameters that follow the command.

3. Use the command to complete the key, as shown in the figure. Enter the starting character of the command, then click the Tab key, and the system will complete the command. If multiple commands have the same prefix, click the Tab key continuously, and the system will switch between commands.

4. Change the system name as shown in the figure. Enter the command sysname to change the system name, such as sysname ABC.

5. Show the running configuration of the system, as shown in the figure. Enter the command display current-configuration to display the configuration that the system is currently running.

6. Save the configuration as shown in the figure. Enter the command save to save the configuration.

7. Delete the command as shown in the figure. Enter the command undo to delete, such as undo sysname.

8. Restore the default configuration, as shown in the figure. Enter the command reset saved-configuration to empty the saved configuration, and then enter the command reboot to restart the device to restore the default configuration.