Dell R730 server Ctrl+R cannot enter the disk array setup interface
Environment: Dell R730 server (also applicable to R720, R630, R620, R420, R530)
Problem: there is no Ctrl+R interface after boot, so you cannot enter the disk array setup interface.
Resolution steps:
1. When booting, press F2 to enter system setup (system setup), and click-System BIOS, as shown in the following figure:
2. Select Boot settings, as shown in the following figure:
Set to BIOS, as shown in the following figure:
4. After exiting the save, as shown in the following figure:
5. Restart the server to see the interface of Crtl+R, and then press Crtl+R to enter the raid configuration interface, as shown below:
6. Press Crtl+R to enter the raid configuration interface, as shown below:
That's it. I hope I can help you.