Build a small local area network
Packet Tracer is a simulation software developed by Cisco for CCNA certification to design, configure and troubleshoot the network. Packer Tracer simulator software is more powerful than Boson and easier to operate than Dynamips, so it is very suitable for beginners of network equipment. Learning task
1. Install Packer Tracer
2. Use a model 2960 switch to interconnect 2pc computers to form a small local area network
3. Set the ip address of the pc machine respectively
4. Verify that pc computers can communicate with each other.
Experimental equipment
Switch_2960 1; PC 2; direct connection
PC1IP:192.168.1.2Submask:255.255.255.0Gateway:192.168.1.1PC2IP:192.168.1.3Submask:255.255.255.0Gateway:192.168.1.1PC1 ping PC2 ReplyPC2 ping PC1 ReplyPC2 ping Gateway Timeout actual combat exercise
PC1ipconfigIP Address..: 192.168.1.2Subnet Mask.: 255.255.255.0Default Gateway.: 192.168.1.1ping 192.168.1.3Pinging 192.168.1.3 with 32 bytes of data:Reply from 192.168.1.3: bytes=32 time=50ms TTL=128Reply from 192.168.1.3: bytes=32 time=8ms TTL=128Reply from 192.168.1.3: bytes=32 time=10ms TTL=128Reply from 192.168.1.3: bytes=32 time=11ms TTL=128Ping statistics for 192.168.1.3:Packets: Sent = 4 Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds:Minimum = 8ms, Maximum = 50ms Average = 19msPC2ipconfigIP Address..: 192.168.1.3Subnet Mask.: 255.255.255.0Default Gateway.: 192.168.1.1ping 192.168.1.2Pinging 192.168.1.2 with 32 bytes of data:Reply from 192.168.1.2: Bytes=32 time=11ms TTL=128Reply from 192.168.1.2: bytes=32 time=10ms TTL=128Reply from 192.168.1.2: bytes=32 time=11ms TTL=128Reply from 192.168.1.2: bytes=32 time=11ms TTL=128Ping statistics for 192.168.1.2:Packets: Sent = 4 Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds:Minimum = 10ms, Maximum = 11ms, Average = 10msping 192.168.1.1Pinging 192.168.1.1 with 32 bytes of data:Request timed out.
Editor: Chess Chess, auditor: Yi Zengbao
