How to burn and write image files on Xinlingsi SInA33 development board

Development platform * Xinlingsi SinlinxA33 Development Board Taobao Shop: https://sinlinx.taobao.com/

The embedded linux development board communication QQ:641395230 has made the linux image file in the last section. Now the work required to burn it into the development board is * SINLINX-A33_qt-4.8.7_lcd1024x600_v3.1 # image file * PhoenixSuit # burning tool * serial port line or USB to serial port line * SINLINX-A33 development board * DNW software.

Open the PhoenixSuit software

Click one button to swipe the machine and select the image file.

Connect the serial port of the development board to the serial port of ttyS2

Open my computer-> device Manager to see which serial port is used. I use COM3 here.

Open the dnw software again

Select COM3 in the configuration options with a baud rate of 115200, and click Serial Port-> connect

The prompt of × × area appears, which is normal.

Press and hold the keyboard number "2" on the dnw, power on the development board, and you can burn the program when this appears.

At this point, the PhoenixSuit pop-up dialog box, select "Yes", the normal upgrade mode to wait for the completion of burning, unplug the serial cable, the development board power up again, OK