Carpenter Optics releases the new Fujitsu 27mm F2.8 automatic lens firmware V1.0.2: optimizes aperture control ring stability and switch speed

CTOnews.com November 23, the AF 27mm F2.8 XF firmware update V1.0.2 was released at the end of October this year, which optimizes the stability of the aperture control ring and the speed of the switch.

The following is the update:

1. Optimize the stability of the aperture control ring

two。 Optimized the speed of switch.

3. Must be in Windows system to upgrade (not supported by Windows 11)

Previously, in the V1.0.1 firmware version, some old cameras have been optimized for focus and compatibility, such as X-A1, X-A3, X-Pro1, and X-E1. For cameras other than these models, there is no need to upgrade this version of firmware.

To download the firmware file, please click on the link and go to the cn.ttartisan.com > download center of the Carpenter's optical website.

CTOnews.com learned that the Fujitsu 27mm F2.8 automatic lens is compact in design and weighs only 93 grams. It uses a "STM + guide screw" stepper motor, which is small in size, smooth and smooth in focus, and supports eye recognition and focus. The lens design has an independent aperture ring, so it can have a more intuitive, convenient and faster operation experience than switching the aperture on the camera, thus quickly entering the photography state. The lens tube and bayonet are made of aviation aluminum, and the lens can be upgraded through the Type-C interface.