Nikon releases new firmware 1.40 for mirrorless camera Z fc, which supports MC-N10 remote control handle.

Thank CTOnews.com netizens and independent photographers for their clue delivery! CTOnews.com May 16 news, Nikon released the new firmware 1.40 of the mirrorless camera Z fc, updated as follows:

Added support for the iOS version of Nikang Movie Speed Biography. Use version 1.1.3 or newer Nikon Movie Flash.

Added support for MC-N10 remote control handles.

Added support for electric zoom available on some lenses.

The focus selection of portrait selfie mode using ML-L7 is improved.

View the camera firmware version process:

Turn on the camera.

Press the camera's MENU button, and then select firmware version from the Settings menu to display the firmware version of the camera.

Check the firmware version of the camera.

Turn off the camera.

Update firmware tutorial:

Create a folder on your computer's hard drive and name it as needed.

Download F-Zfc-V140W.exe to the folder you created in step 1.

Run F-Zfc-V140W.exe to extract the file (Z_fc_0140.bin) to a folder named "ZfcUpdate".

Use the card reader to copy "Z_fc_0140.bin" to a memory card that has been formatted in the camera.

Insert the memory card into the camera and turn on the camera.

Select firmware version from the Settings menu and follow the instructions on the screen to complete the firmware update.

After the update is complete, close the camera and remove the memory card.

Verify that the firmware has been updated to the new version.

Download link attached to CTOnews.com:

Click here to download the Windows version

Click here to download the Mac OS version