Router ip address can't get in what's going on (router ip address)

Hello everyone, Lin Fei to answer the above questions, the router ip address can not get into what is going on, the router ip address many people do not know, now let's take a look!

In this Internet age, almost every household will use a router, but many users report that 192.168.1.1 cannot be opened when using a router, especially when setting up a router, and some users even do not know whether their router ip address is 192.168.1 or 192.168.0.1. Recently, it happened that Bian Shaw's router also encountered this problem. Obviously, I have connected to the router. Here is a detailed description of how the router ip address should be set.

First, set the IP address automatically, using the DHCP server function.

This is a special feature of the DHCP router. Use the DHCP feature to avoid errors caused by manually setting the IP address and subnet mask.

(1) Click the control panel in the start button, open the network connection in the control panel window, right-click the local connection, select the properties option, double-click Internet Protocol (TCP/IP) in the properties dialog box, click to obtain the IP address automatically, and click OK.

(2) Click the "DHCP Server" option on the left side of the router management interface, and click the "enable" button in the pop-up DHCP settings window. The fourth paragraph IP address of the "pool start address" and "pool end address" options is the part that the user can enter at will. We can enter 100 and 200 respectively (note that the start address must be less than the end address, and the start address cannot be 0 or 1, and the end address cannot be 255).

(3) Click the "Save" button after setting up. Turn off the computer and router, power it off and power it on, and then start the computer again.

Second, set the IP address manually

(1) Click the control panel in the start button, open the network connection in the control panel window, right-click the local connection, select the Properties option, and double-click Internet Protocol (TCP/IP) in the Properties dialog box.

(2) Click "use the following IP address", enter the IP address 192.168.1.X (X range 2-254), subnet mask 255.255.255.0, default gateway 192.168.1.1, and then confirm.

I would like to explain the manual and automatic settings of the router IP address. When you install a router, you should also be aware that sometimes the router and the computer are the same. If it is used for too long or useless for a long time, there may be a crash and no access to the Internet. At this time, you can try to restart the router to see if it is the cause of the crash. If you are sure that it is not caused by the crash, just reset it according to the method I mentioned above.

At the end of this article, I hope it will be helpful to you.