Shulou(Shulou.com)06/03 Report--

Topological structure diagram

The first step of the experiment is to configure the sw2 switch sys [Huawei] sysname SW2 [SW2] vlan batch 10 [SW2] int e0 and 0 [SW2-Ethernet0/0/2] port link-type access [SW2-Ethernet0/0/2] port default vlan 10 [SW2-Ethernet0/0/2] un sh [SW2-Ethernet0/0/2] int e0 [SW2-Ethernet0/0/3] port link-type access [SW2-Ethernet0/0/3] port default vlan 20 [SW2-Ethernet0] / 0/3] un sh [SW2-Ethernet0/0/3] int e0/0/1 [SW2-Ethernet0/0/1] port link-type trunk [SW2-Ethernet0/0/1] port trunk allow-pass vlan all [SW2-Ethernet0/0/1] un sh [SW2-Ethernet0/0/1] int g0/0/1 [SW2-GigabitEthernet0/0/1] port link-type trunk [SW2-GigabitEthernet0/0/1] port trunk allow-pass vlan all [SW2-GigabitEthernet0/0/1] un sh Step 2: configure the sw3 switch sys [Huawei] sysname SW3 [SW3] vlan batch 10 [SW3] int e0Accord 2 [SW3-Ethernet0/0/2] port link-type access [SW3-Ethernet0/0/2] port default vlan 10 [SW3-Ethernet0/0/2] un sh [SW3-Ethernet0/0/2] int e0Accord 3 [SW3-Ethernet0/0/3] port link-type access [SW3-Ethernet0/0/3] port default vlan 20 [SW3-Ethernet0/0] / 3] un sh [SW3-Ethernet0/0/3] int e0Placement 1 [SW3-Ethernet0/0/1] port link-type trunk [SW3-Ethernet0/0/1] port trunk allow-pass vlan all [SW3-Ethernet0/0/1] un sh step 3: configure sw1 layer 3 switch (default route up) Pointing down to the static route) Sys [Huawei] sysname SW1 [SW1] vlan batch 10 20 1000 [SW1] int g0xx 1 [SW1-GigabitEthernet0/0/1] port link-type trunk [SW1-GigabitEthernet0/0/1] port trunk allow-pass vlan all [SW1-GigabitEthernet0/0/1] un sh [SW1-GigabitEthernet0/0/1] int g0and2 [SW1-GigabitEthernet0/0/2] port link-type access [SW1-GigabitEthernet0/0/2] port default vlan 1000 [SW1-GigabitEthernet0/0 / 2] un sh [SW1-GigabitEthernet0/0/2] people [SW1] int vlanif 10 [SW1-Vlanif10] ip add 192.168.10.1 24 [SW1-Vlanif10] int vlanif 20 [SW1-Vlanif20] ip add 192.168.20.1 24 [SW1] int vlanif 1000 [SW1-Vlanif1000] ip add 11.0.0.1 30 [SW1-Vlanif1000] Q [SW1] ip route-static 0.0.0.0 0.0.0 11.0.0.2 step 4: configure R1 Router sys [Huawei] sysname R1 [R1] int g0Accord 0 [R1-GigabitEthernet0/0/0] ip add 11.0.0.2 30 [R1-GigabitEthernet0/0/0] un sh [R1-GigabitEthernet0/0/0] int loopback 0 [R1-LoopBack0] ip add 1.1.1.1 30 [R1-LoopBack0] Q [R1] ip route-static 192.168.10.0 24 11.0.0.1 [R1] ip route-static 192.168.20.0 24 11 .0.0.1 step 5: configure PC IP address and gateway

Step 6: test the interconnection of the whole network

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.