Shulou(Shulou.com)06/02 Report--

one。 The experimental environment is shown below.

two。 Configuration commands: static route configuration command

Router (config) # ip route network mask {address | interface}

● network: destination network addr

● mask: subnet mask

● address: the interface address of the shock router that entered the destination network

● interface: the local interface address that reaches the destination network

two。 Configure the interface IP address of PC and router

1. Configure the PC1 and PC2IP addresses as 192.168.1.2 and 24 192.168.2.2, respectively.

two。 Set the router R1 port address

Set the router R2 port address

three。 Set up router static rout

Set up R2 static rout

Set up R1 static rout

Fourth, test whether PC1 and PC2 can communicate with each other

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.