Shulou(Shulou.com)06/03 Report--

1) to remove owner, you need to go to node mode and type the following command:

Cluster1-01 * > options disk.auto_assign

Disk.auto_assign off (value might be overwritten in takeover)

Cluster1-01 * >

Cluster1-01 * > disk remove_ownership 0b.00.11P1

Volumes must be taken offline. Are all impacted volumes offline (YBO)? Y

Cluster1-01 * >

Cluster1-01 * > disk remove_ownership 0b.00.11P2

Disk remove_ownership: Disk 0b.00.11P2 is already unowned.

Disk remove_ownership: Remove ownership failed because the specified disks are already unowned.

Cluster1-01 * >

Cluster1-01 * > disk remove_ownership 0b.00.11

Volumes must be taken offline. Are all impacted volumes offline (YBO)? Y

2) allocate disks

Cluster1::storage disk > assign-disk 1.0.11-owner Cluster1-02

If you have already used P2 to Node1 root volume, then assign the P1 partition of the disk, owner, to node2. You need to use the following command in the nodeshell mode of node1:

Node-01 > disk assign 0b.00.1P1-o Node-02

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.