Shulou(Shulou.com)06/02 Report--

This article shares the configuration mode of linux network NAT for your reference. The details are as follows.

The permissions for NAT access are as follows:

The external network cannot access the virtual machine, the host and the virtual machine can access each other, and the network and the host can also access each other.

1. Open the virtual machine-edit-virtual network editor-

2 、

3. Enter the linux system of the virtual machine and click on the network

4 、

5. Click ipv4

6. Configure the first three bits of the ip ip address of the virtual machine to be consistent with the first three bits of the gateway. The gateway with the same subnet mask should be consistent with the gateway of the virtual machine editor.

6.1. View the gateway

7. Open the local network connection-- change the adapter-- find the vMware8 that may be different. If you put the mouse on it, a prompt will automatically come out-- right-click-- property.

8. Click ipv4-- attribute--

9. The first three bits of the ip address are the same as the virtual machine editor gateway and the last bit, as long as it does not conflict with the gateway and the virtual machine ip (no more than 255. the subnet mask remains the same in the ip gateway and the virtual machine.

10. Enter the linux system, open the terminal test, enter the following command to test whether it is successful or not. This is to test whether the virtual machine can access host.

11. Test whether the host can connect to the virtual machine

The above is the whole content of this article, I hope it will be helpful to your study, and I also hope that you will support it.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.