Shulou(Shulou.com)06/01 Report--

Editor to share with you how to achieve a single network card binding multi-IP in SUSE10, I hope you will gain something after reading this article, let's discuss it together!

Recently, when setting up the virtual site of Aapche, because we want to use a single network card to bind multiple IP, it is found that SUSUE 10 is different from RED HAT in that there is no / etc/sysconfig/network-scripts directory in SUSE10, so we can only find another way.

To set a single Nic to bind multiple IP in SUSE 10, you need to add the following lines to the configuration file / etc/sysconfig/network/ifcfg-eth-id-xx.xx.xx.xx.xx:

IPADDR_1='192.168.2.151'

NETMASK_1='255.255.255.0'

LABEL_1='1'

IPADDR_2='192.168.2.152'

NETMASK_2='255.255.255.0'

LABEL_2='2'

IPADDR_3='192.168.2.153'

NETMASK_3='255.255.255.0'

LABEL_3='3'

Note:

IPADDR_X specifies the required IP address

NETMASK_X specifies the subnet mask of the corresponding IP address

LABEL_X specifies the alias of the network card, where the numbers 1, 2, and 3 correspond to the names found through the ifconfig command: eth0:1, eth0:2, eth0:3.

With the above settings, we bind four IP addresses on a single network card.

After reading this article, I believe you have a certain understanding of "how to bind a single network card to multiple IP in SUSE10". If you want to know more about it, welcome to follow the industry information channel, thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.