Shulou(Shulou.com)06/02 Report--

The server adds a hard disk, creates a raid0, and formats it.

The first step

First boot, press ctrl+R to enter the disk management interface, as shown in the following figure, in the VD Mgmt menu, you can switch menus through ctrl+n, student 'controller 0', and then press F2 virtual disk to create the menu.

Step two

Select 'Creat New VD', enter to create a new virtual disk.

Step three

Press the down arrow to move the cursor to the location of the hard drive, press the spacebar to select the hard drive, and then press the Tab key to move the cursor to the "OK" car.

The fourth step

Select "OK" and press enter so that the RAID0 is created.

Step five

Next, format the created disk, select the created disk "Virtual Disk 1" and press F2.

Step six

Select "Initialization" and press the right arrow key. As shown below:

Step 7

Select "Fash Init" and press enter.

Step 8

Select "YES" and press enter.

Step 9

Select "OK" and press enter.

Step 10

At this point, the RAID0 created by the new disk is formatted, and then press ESC to save and restart.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.