Shulou(Shulou.com)06/02 Report--

If you cannot access the event Viewer on a remote computer, you may receive the following error message:

# 1 error

Computer cannot be connected. Verify that the network path is correct,the computer is available on the network, and the appropriate Windows Firewall rules are enabled on the target computer.

As shown in the above message, to access the event log on the remote computer, you can enable the following rules in the Windows Firewall Advanced Security console. If you are familiar with advanced security Window

S firewall configuration, then just go there to update the policy. But not everyone knows that there are two types of firewalls in newer Windows client operating systems such as Windows 10 and Windows 8 / 8.1 and server operating systems such as Windows Server 2012 and Windows Server 2008. Most standard firewalls people are familiar with the advanced secure Windows firewall commonly used by IT administrators or more advanced users.

The following describes how to go to an advanced firewall and configure to enable the appropriate rule policy.

# 2 Resolve

1. Go to Control Panel-> system and Security-> Windows Firewall

two。 To access the advanced firewall configuration, click the advanced settings link on the left.

3. Enable COM + Network access (DCOM-In)

4. Enable all rules in the remote event Log Management group

5. When rules are enabled, there is no need to restart the computer. You can connect to the target computer immediately

# 3 Note

You can also use Group Policy to enable these rules, and if you are using a Server Core installation, you can use the Netsh AdvFirewall command or the Windows PowerShell NetSecurity module.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.