Shulou(Shulou.com)06/02 Report--

This article is about how to thicken the lines drawn by cad. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

The way to thicken the lines drawn by cad: first open the CAD software on the computer; then draw the required thin lines; then enter the command "w" in the command bar at the bottom of the CAD software interface; finally, enter the value of the bold lines you need, and then click enter.

The drawn line can be thickened by using the W command in the CAD software. Please refer to the following steps for specific operation.

1. First open the CAD software on the computer and enter the main editing interface.

2. Then draw the required thin lines, and here we demonstrate the drawing of a simple rectangular box with thin solid lines.

3. Then double-click the rectangle, and the line will be presented as a dotted line. Then enter the command "w" in the command bar below the CAD software interface.

4. Then enter the required thick line value, and then click enter.

5. After completing the above settings, you can thicken the lines drawn in cad.

Thank you for reading! This is the end of the article on "how to thicken the lines drawn by cad". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.